• An effective control of all micro-organisms including viruses, bacteria, fungi, yeasts and moulds.
• Readily biodegradable into naturally occurring compounds.
• Suitable for all applications.
• Suitable for aerial spray systems.
• Formulated for manual of machine dispensing.

Why use lillidale virucidal powder

• Potentiated Peroxy compound is oxygen-based; highly effective formulation that is less corrosive than traditional hypochlorite formulations.
• Safe handling.
• More economical than other brands.
• Low concentration biocidal action:
  • Dilution rates up to 1 in 3,000 in low organic soiling areas.
  • Dilution rates up to 1 in 300 in high organic soiling areas
• Antiviral concentrations can be reduced for lower viral concentrations.
• Low toxicity (LD50 Rat > 3000 mg/kg).

Application:

As an extremely effective broad spectrum virucidal disinfectant for use in a wide variety of applications:
Veterinary, Agricultural, Equine, Aquaculture, Medical, Domestic, Municipal.

Suitable for the disinfection of all environments and equipment including, at the following rates:

Routine Disinfection
1 part Lillidale Virucidal Powder to 300 parts water

Following a total pre-clean of housing, floors, surfaces and equipment. Use either a pressure washer at a low-pressure setting or knapsack sprayer, use a wide-angled spray. Start in the roof space and work down the walls to the floor, pay particular attention to cracks, ledges, shelves, porous surfaces etc. Apply at the rate of 25L of solution per 100m2 surface area.

Vehicle Disinfection
1 part Lillidale Virucidal Powder to 125 parts water

Following a total pre-clean of the inside and outside of the vehicle using a detergent cleaner. Use a knapsack sprayer with a wide-angled spray and start in the roof space and work down the walls to floor.
Paying particular attention to corners etc. Outside the vehicle pay particular attention to the underside of the vehicle, tyres and mudguards.

Foot & Wheel Dips
1 part Lillidale Virucidal Powder to 150 parts water

Replace frequently (especially if heavy soiling occurs).

Personal Equipment
1 part Lillidale Virucidal Powder to 100 parts water

Livestock Equipment
1 part Lillidale Virucidal Powder to 200 parts water

Equine Health
Stables, Horseboxes and feed rooms – thoroughly dry clean the area and wash the area with a pressure washer or manually at a dilution of 1:150. Tack, grooming equipment, feeders and drinkers wash by hand at a dilution of 1:200. Rinse with clean water.
To control airborne disease, spray a solution of Lillidale Virucidal Powder twice daily at a dilution of 1:300.

Aquaculture
For the effective control of viral, bacterial and fungal disease.

Foot dips
Replenish every 3 days.

Vehicles
Wheels of vehicles should be disinfected.

Surface disinfection

350ml of solution per square meter.
Equipment including boots, waders, dive suits, hoses, brushes, nets, etc, should be soaked in the solution of Lillidale Virucidal Powder and left for 30 minutes followed by rinsing with clean water.

As an Anti-Viral

For the effective control of viruses (except parvovirus), fungi, yeast and moulds dilute 1 part Lillidale Virucidal
Powder to 100 parts water.

For use against parvovirus dilute 1 part Lillidale Virucidal Powder to 50 parts water. Soak objects for approximately
30 minutes (this is the maximum necessary contact time. Overexposure to the solutions should be avoided).

As an Anti-Bacterial: Dilute 1 part Lillidale Virucidal Powder to 500 parts water.

For Aerial Disinfection: Dilute 1 part Lillidale Virucidal Powder to 250 parts water. Apply solution as a fine mist over livestock daily using a pressure washer or mechanical fogger.

Technical Data

Pack Size:  5kg UN approved pails with 50g measure

If you require any further information, please contact us.